| BLANKET |
 |
Excellent insulating properties; low thermal conductivity, excellent thermal shock resistance, low heat storage capacity, inorganic (smoke free). Used in Furnace kiln, reformer and boiler lining, Laboratory ovens, Furnace door lining and seals, Furnace repair, Annealing furnace linings, Investment casting mold wrap, Stress – relieving blankets, Reusable steam and gas turbine insulation, Expansion joints packing, High temperature gaskets, Fire protection, Acoustical service. |
|
|
Working Temp (F) |
DATA |
SDS |
| KAOWOOL, KAOWOOL RT, CERABLANKET, CERACHROME, CERACHEM |
2000-2600 |
 |
|
| SUPERWOOL 607, PLUS, 607 HT |
2012-2372 |
|
|
| BOARD |
 |
Strong, thin, durable ceramic fiber based boards with a variety of high-temperature applications. Their use should be considered whenever there is a need for a thin, durable board with excellent insulating characteristics such as Furnace and kiln hot face linings, Combustion chambers for boilers and heaters, Hot gas duct, flue and chimney liners, Appliance and heat processing insulation, Heat Shields. |
|
|
Working Temp (F) |
DATA |
SDS |
| KAOWOOL M, PM, HP, HD, A, HS, HS45, HT, 2600, 80, 3000 |
2000-2950 |
|
|
| KAOWOOL Millboard |
2000-2700 |
|
|
| SUPERWOOL 607, 607 PM, 607 HT, I607, Alfibon 607 |
1832-2150 |
|
|
| BULK |
 |
Thermal Ceramics bulk products are produced by varying composition, fiber length, compressed density, fiber content, fiber diameter, and lubricity to serve a wide range of customer needs. Expansion joints construction, Low mass kiln car construction, Tube seal fabrication, Thermal and acoustical insulation, Filtration media, Reinforcement for plastic and resins, Filler in resins and paint. |
|
|
Working Temp (F) |
DATA |
SDS |
| KAOWOOL, KAOWOOL HP, CERAFIBER, CERACHEM, CERACHROME, SAFFIL |
2000-2800 |
|
|
| SUPERWOOL 607, PLUS, 607 HT |
1832-2012 |
|
|
| PAPERS |
 |
High-performance paper products for thermal, acoustical, or filtration management. Good resistance to tearing, high flexibility, resistant to thermal shock and have very low thermal conductivity and low thermal mass. |
|
|
Working Temp (F) |
DATA |
SDS |
| KAOWOOL 500, 700, 900, 2000, 2600, 3000 |
2150-3000 |
|
|
| SUPERWOOL 607, 607 HT |
1832-2372 |
|
|
| LYTHERM 550-L |
2300 |
|
|
| LYTHERM 970-L |
2300 |
|
|
| LYTHERM 1530-L, 1535-L |
2300 |
|
|
| LYTHERM LDF |
1400 |
|
|
| LYTHERM ROLLBOARD |
2300 |
|
|
| FELTS |
 |
Ceramic felt exhibits excellent strength, has good flexibility and is pleasant to handle, cuts cleanly and is ideally suited for the manufacture of the most intricate die-cut shapes and gaskets even in thin sections. It is available in roll form which permits maximum material utilization offering improved flexibility to the die-cutter. |
|
|
Working Temp (F) |
DATA |
SDS |
| K Shield |
2300 |
|
|
| Cerafelt, Cerachrome |
2300 |
|
|
| BRICK |
 |
Insulating Firebrick (IFB) operate in temperatures up to 3250°F (1787°C). In addition, a line of high alumina (90%+) dense firebrick, SR® is engineered to handle very difficult applications. These high purity bricks have excellent load-bearing strength at temperatures above 3000°F (1649°C), and provide good thermal shock resistance. |
|
|
Working Temp (F) |
DATA |
SDS |
| K-23, TC-23, IFB-23, K-25 |
2300-2500 |
|
|
| K-26, TJM-26, TJM-28, JM 28, JM-30 |
2600-3000 |
|
|
| CASTABLES |
 |
Monolithic products provides a wide range of innovative solutions for heat-intensive challenges. Available in different formulations, densities, and installation methods, monolithics can be used as primary or secondary insulation, for repair, or for specialty applications. A lining may be installed using a single material or can be a complex selection depending on the environment/operation of the lined structure. Specific grades have been developed for high temperature insulation, metal contact, slag resistance, abrasion resistance or thermal shock resistance. |
|
|
Working Temp (F) |
DATA |
SDS |
| Kaocast, Kaocrete |
3000 |
|
|
| Kaolite 1600-1800 |
1600-1800 |
|
|
| Kaolite 2800-3300 |
2800-3300 |
|
|
| MORTAR, CEMENT, COATINGS |
 |
Fiber based insulation materials available in coatings and cements. Manufactured specifically to aid in efficient furnace, kiln and boiler operation, these products eliminate hot spots, provide superior maintenance solutions, and make insulation installation quick and easy. |
|
|
Working Temp (F) |
DATA |
SDS |
| Mortars Smoothset, Airset, High Temp |
2850-3000 |
|
|
| Cerakote, Kaowool B Cement |
2150-2200 |
|
|
| Rigidizer |
|
|
|
| Kaowool Sealcote HT |
2500 |
|
|
| Superwool Sealcote HT |
2600 |
|
|
| PUMPABLES, MOLDABLES |
 |
Fiber based insulation materials available in pumpables, moldables. Manufactured specifically to aid in efficient furnace, kiln and boiler operation, these products eliminate hot spots, provide superior maintenance solutions, and make insulation installation quick and easy. |
|
|
Working Temp (F) |
DATA |
SDS |
| Kaowool Pumpable |
1900-2800 |
|
|
| Superwool Pumpable |
1900 |
|
|
| Kaowool Moldable |
1800-2000 |
|
|
| Superwool Moldable |
2000 |
|
|
| MODULES |
 |
Pyro-Bloc modules are manufactured from a monolithic ceramic fiber. Pyro-Bloc modules combine the insulating material advantages of ceramic fiber with rapid furnace installation. These modules are lightweight, have low heat storage and provide durable service. |
|
|
Working Temp (F) |
DATA |
SDS |
| Pyro-Bloc Y |
2200-2500 |
|
|
| Pyro-Bloc M |
2200-2500 |
|
|
| Pyro-Fold, Uniblock, Z-Bloc |
2200-2500 |
|
|
| Superwool Pyro-Fold, Pyro-Stack |
1832-2102 |
|
|
